Welcome to AtBatt.com! |

    • my cart
    • 0 Items  Total $0.00
  • 1-877-528-2288
  • Customer Service
Power-Sonic PS-1290 12V 9AH Sealed Lead Acid Battery

---- Alternate Images ----

Power-Sonic PS-1290 12V 9AH Sealed Lead Acid Battery Power-Sonic PS-1290 12V 9AH Sealed Lead Acid Battery ps-1290-2.jpg ps-1290-3.jpg

Power-Sonic PS-1290 12V 9AH Sealed Lead Acid Battery

Genuine Power-Sonic PS-1290 F2 Battery. Factory New straight from Power-Sonic. Full 1 Year Warranty.
  • SKU: PS-1290
  • Brand: Power-Sonic
  • Our Price: $20.99
Quantity Price
1-19 $20.99
20-49 $20.49
50-99 $20.29
100+ Call for Price

Availability: In Stock

* Estimate Shipping Cost

Features

ChemistryLead Acid
Voltage12
Capacity9Ah
Rating Whr102
Cellnum6
ConnectorF2
Warranty1 Year

Quick Overview

Power-Sonic PS-1290 12V/9AH Sealed Lead Acid Battery
The Power-Sonic PS-1290 F2 valve regulated sealed lead acid battery is maintenance free, easy to handle, rugged and economical. It has a wide operating temperature, long service life under ideal working conditions, high discharge rate, and deep discharge recovery.

Key Features
  • Absorbent Glass Mat (AGM) technology for superior performance.
  • Valve regulated, spill proof construction allows safe operation in any position.
  • Power/volume ratio yielding unrivaled energy density.
  • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified.
  • U.L. recognized under file number MH 20845
  • Sealed maintenance free - valve regulated, spill-proof construction
  • Safe operation in any position
  • No need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle"
  • Long Service Life - Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200 and 1000 charge/discharge cycles depending on the average depth of discharge.

  • Construction
    PLATES (Electrodes) - Plate construction is the key to producing a good battery. Recognizing this, POWER-SONIC utilizes the latest technology and equipment to cast grids from a lead-calcium alloy free of antimony. The small amount of calcium and tin in the grid alloy imparts strength to the plate and guarantees durability even in extensive cycle service. Lead oxide paste is added to the grid to form the electrically active material. In the charged state, the negative plate paste is pure lead and that of the positive lead oxide. Both of these are in a porous or spongy form to optimize surface area and thereby maximize capacity.
    SEPARATORS - POWER-SONIC separators are made of non-woven glass fiber cloth with high heat and oxidation resistance. The material further offers superior electrolyte absorption and retaining ability, as well as excellent ion conductivity.
    ELECTROLYTE - Immobilized dilute sulfuric acid: H2SO4.
    CONTAINER - Case material is ABS, high-impact plastic resin, styrene, or a polypropylene-polyethylene co-polymer with high resistance to chemicals and flammability.
    LEAK-PROOF DESIGN & OPERATIONAL SAFETY - POWER-SONIC batteries have been approved for shipment by air, both by D.O.T. and I.A.T.A. U.L.'s component recognition program for emergency lighting and power batteries lists POWER-SONIC under file numbers MH14328 and MH14838.
    TERMINALS - Depending on model, batteries come either with AMP Faston type terminals made of tin plated brass, post type terminals of the same composition with threaded nut and bolt hardware, or heavy duty flag terminals made of lead alloy. A special epoxy is used as sealing material surrounding the terminals.
    RELIEF VALVE - In case of excessive gas pressure build-up inside the battery (usually caused by abnormal charging) the relief valve will open and relieve the pressure. The one-way valve not only ensures that no air gets into the battery where the oxygen would react with the plates causing internal discharge, but also represents an important safety device in the event of excessive overcharge. Vent release pressure is between 2-6 psi; the seal ring material is neoprene rubber.
    CASE SEALING - Depending on model the case sealing is ultrasonic welded, epoxy, or heat seal
    Specifications
    ChemistryLead Acid
    Capacity9Ah
    Rating whr102
    Cellnum6
    ConnectorF2
    Length5.95 inches
    Width2.56 inches
    Height3.7 inches
    Weight6.10 lbs
    Upc813340011465
    Warranty1 Year
     
    Customers With Power-Sonic PS-1290 12V 9AH Sealed Lead Acid Battery Also Bought
     
    Product reviews
    Estimate Shipping Cost
    • Yes No
    Compatiblity Chart

     

    • BizRate Seal
    • Trustwave Seal
    • TRUSTe Seal
    • GeoTrust Seal